Difference between revisions of "IQue Card"
(Added Subtab "Clones") |
(→Clones: info about Capacitors) |
||
Line 14: | Line 14: | ||
In the 4Q 2021 attempts have been made to Clone the iQue Card "Dookie" with success. | In the 4Q 2021 attempts have been made to Clone the iQue Card "Dookie" with success. | ||
+ | The iQue Card uses 100nF capacitors on all 6 Placements. | ||
+ | |||
Revision as of 14:15, 22 December 2021
The iQue Card (Chinese: 神游卡) is a removable memory card of the iQue Player, used to store games and the "Upgradeable Operating System". It is located on the bottom of every unit.
The iQue Card is housed in a plastic shell, which contains a Samsung K9F1208U0M-YCB0 NAND chip on a special PCB codenamed "DOOKIE". The contents of the NAND are documented on the NAND page.
Datasheet: [1]
DOOKIE
The DOOKIE board is very basic, and it contains the NAND flash, a few capacitors, and an edge connector to connect with an iQue Player. The connector has a 1.1mm pitch and seems to be custom made. No other commonly-available connector appears to fit in it except the MicroSD.
Clones
In the 4Q 2021 attempts have been made to Clone the iQue Card "Dookie" with success. The iQue Card uses 100nF capacitors on all 6 Placements.
Source Files: https://github.com/HDR/NintendoPCBs/tree/master/iQue_Dookie
Pinout
Pin # | Name | Function |
---|---|---|
1 | GND | Power |
2 | /WP | Write Protect |
3 | /WE | Write Enable |
4 | ALE | Address Latch Enable |
5 | CLE | Command Latch Enable |
6 | VCC | Power (3.3v) |
7 | /CE | Chip Enable |
8 | /RE | Read Enable |
9 | R/B | Read/Busy |
10 | N/C | Not Connected |
11 | N/C | Not Connected |
12 | IO7 | Data Input/Output 7 |
13 | IO6 | Data Input/Output 6 |
14 | IO5 | Data Input/Output 5 |
15 | IO4 | Data Input/Output 4 |
16 | GND | Power |
17 | VCC | Power (3.3v) |
18 | IO3 | Data Input/Output 3 |
19 | IO2 | Data Input/Output 2 |
20 | IO1 | Data Input/Output 1 |
21 | IO0 | Data Input/Output 0 |
22 | GND | Power |