Difference between revisions of "IQue Card"
(→Clones: added info not avalable 22.12.2021) |
(→Clones: added and) |
||
| Line 16: | Line 16: | ||
The [[SKSA|"Upgradeable Operating System"]] hints that it supports the chips: Samsung K9F1208U0M (64M), Samsung K9K1G08U0M (128M), Toshiba TC58512FT (64M)(untested) and ST NAND512-A (128M, 256M, 512M, 1G)(all untested). | The [[SKSA|"Upgradeable Operating System"]] hints that it supports the chips: Samsung K9F1208U0M (64M), Samsung K9K1G08U0M (128M), Toshiba TC58512FT (64M)(untested) and ST NAND512-A (128M, 256M, 512M, 1G)(all untested). | ||
| − | The clone PCB's used during testings of K9F1208U0M (64M) K9K1G08UOM (128M) have been made by HDR. | + | The clone PCB's used during testings of K9F1208U0M (64M) and K9K1G08UOM (128M) have been made by HDR. |
Latest revision as of 23:16, 22 December 2021
The iQue Card (Chinese: 神游卡) is a removable memory card of the iQue Player, used to store games and the "Upgradeable Operating System". It is located on the bottom of every unit.
The iQue Card is housed in a plastic shell, which contains a Samsung K9F1208U0M-YCB0 NAND chip on a special PCB codenamed "DOOKIE". The contents of the NAND are documented on the NAND page.
Datasheet: [1]
DOOKIE
The DOOKIE board is very basic, and it contains the NAND flash, a few capacitors, and an edge connector to connect with an iQue Player. The connector has a 1.1mm pitch and seems to be custom made. No other commonly-available connector appears to fit in it except the MicroSD.
Clones
In the 4Q 2021 attempts have been made to Clone the iQue Card "Dookie" with success. The iQue Card uses 100nF capacitors on all 6 Placements. The "Upgradeable Operating System" hints that it supports the chips: Samsung K9F1208U0M (64M), Samsung K9K1G08U0M (128M), Toshiba TC58512FT (64M)(untested) and ST NAND512-A (128M, 256M, 512M, 1G)(all untested).
The clone PCB's used during testings of K9F1208U0M (64M) and K9K1G08UOM (128M) have been made by HDR.
PCB Files: https://github.com/HDR/NintendoPCBs/tree/master/iQue_Dookie
Pinout
| Pin # | Name | Function |
|---|---|---|
| 1 | GND | Power |
| 2 | /WP | Write Protect |
| 3 | /WE | Write Enable |
| 4 | ALE | Address Latch Enable |
| 5 | CLE | Command Latch Enable |
| 6 | VCC | Power (3.3v) |
| 7 | /CE | Chip Enable |
| 8 | /RE | Read Enable |
| 9 | R/B | Read/Busy |
| 10 | N/C | Not Connected |
| 11 | N/C | Not Connected |
| 12 | IO7 | Data Input/Output 7 |
| 13 | IO6 | Data Input/Output 6 |
| 14 | IO5 | Data Input/Output 5 |
| 15 | IO4 | Data Input/Output 4 |
| 16 | GND | Power |
| 17 | VCC | Power (3.3v) |
| 18 | IO3 | Data Input/Output 3 |
| 19 | IO2 | Data Input/Output 2 |
| 20 | IO1 | Data Input/Output 1 |
| 21 | IO0 | Data Input/Output 0 |
| 22 | GND | Power |