Video cable
Revision as of 02:39, 1 April 2018 by Asper (talk | contribs) (Created page with "== Video Cable Pinout == 200px|thumb|left|alt video cable pinout layout The format of the SKSA is simple: a 64KiB SK, followed by SA1 (ticket + data), opti...")
Video Cable Pinout
File:Pinout.png
alt video cable pinout layout
The format of the SKSA is simple: a 64KiB SK, followed by SA1 (ticket + data), optionally followed by SA2 (ticket + data):
| Pin N. | Description |
|---|---|
| 1 | Controller # 3 input |
| 2 | Y (S-Video) |
| 3 | GND (Video) |
| 4 | GND (Audio) |
| 5 | Audio L |
| 6 | GND |
| 7 | Batt Data ?? |
| 8 | Power input + |
| 9 | Power input + |
| 10 | Power input - |
| 11 | Power input - |
| 12 | Batt data ?? |
| 13 | GND (Audio) |
| 14 | Audio R |
| 15 | Video Composite |
| 16 | C (S-Video) |
| 17 | Controller # 2 input |
| 18 | Controller # 4 input |
S-Video Signal
[[File:Cable_multi.png|200px|thumb|left] The multiplayer box is passing-through the S-video signal, but unfortunately the cable that goes between the iQue and that box does not pass the S-Video signal, so to use the multiplayer box with s-video you would need to modify that cable.
Information retrieved here.